Should i wind my automatic watch




















Those who are on their feet all day will need to wind their watch much less. We advise for you to keep an eye on your power reserve and wind accordingly. The winder mimics the movement of your wrist motion keeping the rotor spinning. They also are the perfect way to store your watch collection no matter how big or small protecting from any risk of damage.

There are many chic watch winders currently on the market that are the perfect finishing touch to your home. Practical and stylish! Automatic watches cannot be overwound as once the mainspring is completely tightened the rotor disengages. Therefore, you can leave your timepieces mounted in your watch winder of voice without worrying about damaging your favourite piece.

What makes an automatic watch also known as a self-wind watch different is that it has a weighted rotor mounted to the back of the watch's movement. The rotor is usually shaped in a semi-circle and is connected to the mainspring via a series of gears.

With the motion of your wrist, the rotor spins on an axle and in doing so, winds the mainspring which in turn powers your watch. The power reserve is the amount of time it takes for a fully wound watch to unwind when not worn. Most mechanical watches have a power reserve of between 36 and 42 hours. This means that the watch can run for that duration on a full wind. Please refer to the manufacturer's product specifications to familiarize yourself with what duration you can expect from your watch's power reserve.

Yes, they do. Picture the mainspring inside a watch. When you first get an automatic watch, the spring is completely unwound. Moving the watch around will cause the rotor to spin, which in turn will begin winding the mainspring. While this will get the watch running it will not be enough to fully tighten the mainspring which would let you take advantage of the power reserve to its fullest capacity.

It is therefore important to first wind the crown about times which is enough to completely wind the mainspring on most watches.

Once the mainspring has been fully wound, and the watch is worn on an active wrist, the rotor will do its job by continuously winding the mainspring thereby topping off the watch's power reserve.

There is a common misconception that an automatic watch never needs to be wound. It's a mistake to think that a watch that has wound down or that is close to the end of its power reserve just needs to be worn for a while to wind itself up.

A manual watch needs to be wound every morning or evening. Most manual watches will last for about 40 hours, so if you had to forget to wind it for a day or two, it will stop working. Most watches will reach maximum power by winding the crown 30 to 40 times but this can vary. The minute you feel resistance, the watch is fully wound. Automatic vs. Manual Winding Watches Both manual and automatic watches have a complete mechanical mechanism that keeps the watch operational.



0コメント

  • 1000 / 1000